BHSSZ - 621423 MODERN TENACIN CEMENT LIQUID
- MSDS: BHSSZ
- Manufacturer: CAULK DENTSPLY
- Product Name: 621423 MODERN TENACIN CEMENT LIQUID
- National Stock Number: 6520-00F010563
Product Identification
Product ID:621423 MODERN TENACIN CEMENT LIQUID
MSDS Date:11/17/1987
FSC:6520
NIIN:00F010563
MSDS Number: BHSSZ
Responsible Party
MILFORD, DE 19963
Emergency Phone: (302) 422-4511
Info Phone: (302) 422-4511
Cage: 11107
Contractor
Telephone: 302-422-4511/ 703-451-1900
Cage: 11107
Ingredients
PHOSPHORIC ACID (SARA III)
CAS: 7664-38-2
RTECS: TB6300000
OSHA PEL 1 MG/M3/3 STEL
ACGIH TLV: 1 MG/M3/3 STEL; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: EXCESSIVE BREATHING OF
VAPORS/MISTS MAY CAUSE OF PULMONARY EDEMA/CHEMICAL PNEUMONITIS.
PROLONGED EXPOSURE MAY CAUSE TISSUE DAMAGE/SUSCEPTIBILITY TO
RESPIRATORY ILLNESS. EYE: MAY CAUSE PERM ANENT INJURY. SKIN: MAY
BURN OR DESTROYTISSUE/DERMATITIS. INGESTION: MAY CAUSE SEVERE
ABDOMINAL/NAUSEA/VOMITING/DEATH.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: COUGHING, CHEST PAIN, DIFFICULTY &
DEATH. EYE/SKIN: BURNING & IRRITATION. INGESTION: CAUSES SEVERE
ABDOMINAL PAIN, NAUSEA, VOMITING,
Medical Cond Aggravated by Exposure:PERSONS W/PRE-EXISTING SKIN
DISORDERS, EYE PROBLEMS, OR KIDNEY, OR RESPIRATORY FUNCTION MAY BE
MORE SUSCEPTIBLE TO THE EFFECTS OF PHOSPHORIC ACID.
First Aid
First Aid:EYE/SKIN: RINSE W/PLENTY OF WATER & SEEK MED ATTN.
INHALATION: REMOVE TO FRESH AIR. GET MED ATTN. INGESTION: DON'T
INDUCE VOMITITING. IF CONSCIOUS, GIVE LOTS OF WATER OR MILK. GET
MED ATTN.
Fire Fighting
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, OR CO2
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS. USE
WATER SPRAY TO COOL NEARBY CONTAINERS & STRUCTURES EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:EXTINGUISH ALL NEARBY SOURCES OF IGNITION
SINCE FLAMMABLE HYDROGEN GAS WILL BE FORMED FROM CONTACT WITH SOME
METALS.
Accidental Release
Spill Release Procedures:COLLECT LEAKING LIQUID IN SEALABLE CONTAINER &
WASH ANY REMAINDER WITH LARGE AMOUNTS OF WATER.
Handling
Handling and Storage Precautions:STORE AWAY FROM STRONG BASES,
FOODSTUFFS & BEVERAGES.
Exposure Controls
Ventilation:LOCAL EXHAUST
Protective Gloves:RUBBER
Eye Protection:FACE SHIELD
Other Protective Equipment:RUBBER APRON
Work Hygienic Practices:OBSERVE NORMAL CARE WHEN WORKING WITH
CHEMICALS.
Supplemental Safety and Health
Chemical Properties
Solubility in Water:SOLUBLE
Appearance and Odor:COLORLESS LIQUID W/STRONG, PUNGENT ACID ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG BASES & METALS
Hazardous Decomposition Products:HYDROGEN MAY BE RELEASED IF REACTED
WITH METALS.
Disposal
Waste Disposal Methods:PLACE MATERIAL IN SEALED PLASTIC CONTAINER &
PLACE IN FEDERAL, STATE, OR LOCAL DISPOSAL SITE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.